Shielded Ambidextrous Safety Design<\/h3>\n
The shielded ambidextrous safety configuration provides controls on both sides of the frame while adding a raised shield around the safety area. The shield is intended to create additional separation between the shooter’s thumb and the reciprocating slide.<\/p>\n
This is different from a conventional ambidextrous safety without the shield. The shielded design changes the geometry around the thumb area and can therefore produce a noticeably different feel when the pistol is held.<\/p>\n
Atlas owners describe the shield as a feature that can help prevent unintended contact between the shooter’s thumb and the slide.<\/p>\n
Ambidextrous Configuration atlas gunworks artemis v3 shielded ambi safeties<\/h3>\n
An ambidextrous safety provides a safety lever on both sides of the pistol. This makes the control accessible from either side rather than restricting operation to a single-sided lever.<\/p>\n
Atlas configurations can also be specified with different bias arrangements. For example, owner-configured Artemis V3 examples have been documented with\u00a0\u201cShielded Ambi Right Bias\u201d<\/strong> safeties.<\/p>\n The exact configuration should therefore be verified on an individual pistol rather than inferred simply from the Artemis V3 name.<\/p>\n The V3 generation represents an evolution of Atlas’s 2011-style pistols. Available documentation indicates that V3 pistols use billet slides manufactured by Atlas in Vermont. The optic plate was also redesigned, with additional mounting holes intended to improve its attachment.<\/p>\n The V3 generation also moved from traditional dovetail front sights to an interchangeable Glock-style front sight arrangement, while a filler option is available for configurations that do not use a conventional front sight.<\/p>\n These changes are separate from the shielded safety itself, but they help distinguish a V3 Artemis from earlier configurations.<\/p>\n The primary distinguishing feature of the shielded safety is its geometry. Instead of presenting a simple flat lever beside the frame, the shield creates an additional vertical surface around the control.<\/p>\n For shooters who naturally place the thumb over the safety, that geometry can alter the interface between the hand, safety, and slide. User reports describe the shield as useful for preventing unwanted slide contact, although individual hand size and grip technique can produce different results.<\/p>\n Because ergonomics are highly individual, the most useful evaluation is based on the actual configuration and the shooter’s hand position rather than a universal claim about comfort or suitability.<\/p>\n Atlas’s terminology can distinguish between ambidextrous safeties and configurations biased toward one side. Recent owner discussions specifically mention right-biased and left-biased safety arrangements on Atlas pistols.<\/p>\n This distinction matters when documenting an Artemis V3. Two pistols may both be described generally as having \u201cshielded ambi safeties\u201d while having different bias configurations.<\/p>\n For catalog purposes, the complete description should therefore identify the safety type and bias whenever that information is available.<\/p>\n The Artemis V3 with shielded ambidextrous safeties can be described as a modern 2011-style pistol configuration featuring bilateral manual-safety controls surrounded by an additional protective shield. The arrangement combines ambidextrous operation with a distinctive ergonomic profile around the thumb area.<\/p>\n The safety configuration forms only one part of the Artemis V3 specification. Other details\u2014including finish, trigger configuration, grip panels, magazine-release orientation, optic plate, front sight, and magwell\u2014can be independently configured.<\/p>\n Atlas Gunworks Artemis v3 pistols<\/p><\/div>\n Consequently, photographs or configuration records are useful when identifying a particular Artemis V3.<\/p>\n For an accurate product listing, the following details should be verified on the specific firearm:<\/p>\n Atlas Artemis V3\u00a0model designation<\/p>\n<\/li>\n Caliber<\/p>\n<\/li>\n Finish<\/p>\n<\/li>\n Shielded or unshielded\u00a0safety<\/p>\n<\/li>\n Ambidextrous or single-sided configuration<\/p>\n<\/li>\n Right or left\u00a0bias<\/p>\n<\/li>\n Trigger configuration<\/p>\n<\/li>\n Grip configuration<\/p>\n<\/li>\n Magazine-release orientation<\/p>\n<\/li>\n Optic-plate configuration<\/p>\n<\/li>\n Front-sight configuration<\/p>\n<\/li>\n Magwell configuration<\/p>\n<\/li>\n Factory versus aftermarket\u00a0components<\/p>\n<\/li>\n<\/ul>\n This approach prevents\u00a0features from one\u00a0Artemis configuration from\u00a0being incorrectly attributed\u00a0to another.<\/p>\n The shielded ambidextrous\u00a0safety is a\u00a0firearm control and\u00a0should be operated\u00a0only according to\u00a0the manufacturer’s instructions. Any adjustment, replacement, fitting, or modification\u00a0of a safety\u00a0component should be\u00a0performed by the\u00a0manufacturer or an\u00a0appropriately qualified\u00a0gunsmith.<\/p>\n The owner’s manual\u00a0should take precedence\u00a0over generalized descriptions, particularly for disassembly, maintenance, inspection, and component replacement.<\/p>\n The firearm should\u00a0also be stored\u00a0securely and handled\u00a0in accordance with\u00a0applicable firearm-safety\u00a0practices and local\u00a0laws.<\/p>\n The\u00a0Atlas Gunworks Artemis\u00a0V3 with shielded\u00a0ambidextrous safeties<\/strong>\u00a0combines the V3-generation Artemis platform\u00a0with bilateral manual-safety controls surrounded\u00a0by protective shield\u00a0geometry. The shield\u00a0distinguishes the configuration\u00a0from a conventional\u00a0ambidextrous safety and\u00a0changes the ergonomics\u00a0around the thumb\u00a0area.<\/p>\n The Artemis V3 itself incorporates several V3-generation updates, including a billet slide, redesigned optic plate,<\/p>\n The Atlas Gunworks Artemis V3 represents a newer generation of the Artemis platform. The V3 designation is important because Atlas introduced several component changes as part of this generation, including a new front-sight arrangement and an updated optic-plate system. Atlas’s own technical material specifically discusses the V3 front-sight system and the changes made to the platform.<\/p>\n These updates provide a useful way of distinguishing a V3 Artemis from earlier Artemis variants. Atlas previously listed the Artemis V2 as a retired model, making the generation distinction relevant when documenting an individual pistol.<\/p>\n The Artemis has historically been associated with the 2011-style double-stack 1911 platform. The V3 version continues that general architecture while incorporating newer manufacturing and component choices.<\/p>\n The shielded ambidextrous safety is one of the most visually distinctive configurations associated with the Artemis V3.<\/p>\n An ambidextrous safety places a manual safety control on both sides of the frame. This arrangement allows the controls to be accessed from either side of the pistol. The shielded version adds additional material around the safety lever, creating a more pronounced protective profile alongside the frame.<\/p>\n This configuration is particularly noticeable when viewed from above or from the rear of the pistol. Instead of a relatively flat safety lever, the shield produces a raised boundary around the control area.<\/p>\n The exact shape and dimensions should be verified on the specific firearm because Atlas configurations can vary. A product description should therefore identify the safety as shielded and ambidextrous only when that configuration has been confirmed.<\/p>\n The shield changes the physical interface between the frame and the shooter’s thumb. Rather than presenting the safety lever as an isolated control, the surrounding shield creates a defined area around it.<\/p>\n This can be relevant to users who compare different safety configurations. A conventional ambidextrous safety and a shielded ambidextrous safety may perform the same basic control function while providing noticeably different physical geometry.<\/p>\n Hand size, grip preference, and individual anatomy can all influence how a particular configuration feels. Consequently, ergonomic observations should be treated as individual characteristics rather than universal claims.<\/p>\n Atlas terminology can include a bias designation for certain safety configurations. A right-biased ambidextrous safety does not eliminate the control on the opposite side; instead, the geometry can be configured with a particular side receiving greater emphasis.<\/p>\n For a catalog or product listing, the safest approach is to record the exact factory configuration rather than simply describing every Artemis V3 as having an identical safety arrangement.<\/p>\n This distinction is especially useful when comparing used examples, because a pistol may have been ordered with a particular configuration or subsequently modified.<\/p>\n Atlas has published dedicated information about its V3 front sights, explaining that the company changed the front-sight system on V3 pistols. The new system uses a Glock-style front sight arrangement, with multiple front-sight options available.<\/p>\n This is a meaningful identification feature because earlier Artemis models can have different sight arrangements.<\/p>\n The front sight should therefore be documented separately from the rear sight and optic configuration. A photograph can help establish the configuration, but factory documentation provides stronger evidence when available.<\/p>\n The Artemis V3 can also be configured around modern handgun optics. Atlas has separately published material concerning its V3 optic-plate changes, indicating that the plate was redesigned as part of the V3 evolution.<\/p>\n An optic-ready configuration should be distinguished from a pistol that merely has an optic installed aftermarket. These are not necessarily equivalent from a cataloging perspective.<\/p>\n For a detailed product description, the optic itself, mounting arrangement, plate, and any factory-installed components should be identified independently when the information is available.<\/p>\n Atlas Gunworks emphasizes detailed machining and purpose-built construction throughout its pistol range. The Artemis belongs to this broader family of high-end 2011-style pistols.<\/p>\n The external appearance reflects that approach through carefully machined slide surfaces, frame contours, grip treatment, controls, and sight components.<\/p>\n The exact finish can vary between examples. Atlas has also documented different finish offerings over time, including PVD treatments, so photographs alone should not be used to establish the original factory finish.<\/p>\n The Artemis V3 should be understood as a configurable platform rather than a firearm for which every example necessarily has identical equipment.<\/p>\n Potentially relevant configuration details include: Atlas Gunworks Artemis v3 pistols Atlas Gunworks Artemis v3 pistols Atlas Gunworks Artemis v3 pistols Atlas Gunworks Artemis v3 pistols Atlas Gunworks Artemis v3 pistols Atlas Gunworks Artemis v3 pistols Atlas Gunworks Artemis v3 pistols Atlas Gunworks Artemis v3 pistols Atlas Gunworks Artemis v3 pistols Atlas Gunworks Artemis v3 pistols Atlas Gunworks Artemis v3 pistols Atlas Gunworks Artemis v3 pistols Atlas Gunworks Artemis v3 pistols Atlas Gunworks Artemis v3 pistols.<\/p>\n Safety type<\/p>\n<\/li>\n Safety bias<\/p>\n<\/li>\n Finish<\/p>\n<\/li>\n Trigger configuration<\/p>\n<\/li>\n Grip treatment<\/p>\n<\/li>\n Magwell<\/p>\n<\/li>\n Optic plate<\/p>\n<\/li>\n Optic<\/p>\n<\/li>\n Front sight<\/p>\n<\/li>\n Rear sight<\/p>\n<\/li>\n Magazine configuration<\/p>\n<\/li>\n Factory or aftermarket\u00a0modifications<\/p>\n<\/li>\n<\/ul>\n Recording these details\u00a0creates a more\u00a0accurate description of\u00a0an individual firearm.<\/p>\n One of the\u00a0most important considerations\u00a0when describing a\u00a0used Artemis V3\u00a0is the distinction\u00a0between factory equipment\u00a0and subsequent modifications.<\/p>\n A pistol may\u00a0retain the original\u00a0frame and slide\u00a0while having different\u00a0grips, sights, optics, safeties, or other\u00a0components installed later.<\/p>\n This distinction is\u00a0particularly important\u00a0for premium firearms\u00a0because configuration can\u00a0contribute significantly\u00a0to their identification\u00a0and documentation.<\/p>\n Accordingly, a listing\u00a0should use terms\u00a0such as \u201cfactory\u00a0equipped\u201d only when\u00a0the origin of\u00a0the component has\u00a0been established.<\/p>\n Atlas provides a dedicated pistol-service program for its products. Its current service information describes inspection, cleaning, trigger and extractor checks, spring inspection, chamber and feed-ramp work, and identification of potential service requirements as part of its standard maintenance offering.<\/p>\n This information is\u00a0useful for understanding\u00a0the manufacturer’s approach\u00a0to maintaining its\u00a0pistols. It also\u00a0illustrates why specialized\u00a0service may be\u00a0appropriate for a\u00a0highly fitted 2011-style firearm.<\/p>\n The manual and\u00a0manufacturer instructions\u00a0should remain the\u00a0primary references for\u00a0routine maintenance. Safety\u00a0components should not\u00a0be modified without\u00a0appropriate technical knowledge\u00a0and should be\u00a0serviced by the\u00a0manufacturer or a\u00a0qualified gunsmith when\u00a0necessary.<\/p>\n For collectors and\u00a0owners, documenting an\u00a0Artemis V3 accurately\u00a0involves more than\u00a0recording the model\u00a0name.<\/p>\n A useful record\u00a0can include the\u00a0model generation, serial\u00a0number where legally\u00a0appropriate, finish, safety\u00a0configuration, sight arrangement, optic plate, installed\u00a0optic, grips, trigger, magazines, and original\u00a0accessories.<\/p>\n Original packaging and\u00a0factory documentation can\u00a0also help establish\u00a0the configuration of\u00a0an individual example.<\/p>\n This becomes especially\u00a0valuable when a\u00a0firearm has been\u00a0customized or transferred\u00a0between owners.<\/p>\n The Artemis name has been used across multiple generations. Atlas currently identifies the earlier Artemis V2 as a retired model, while its newer V3 platform incorporates updated components.<\/p>\n Consequently, simply identifying\u00a0a firearm as\u00a0an \u201cAtlas Artemis\u201d may not provide\u00a0enough information for\u00a0a complete product\u00a0record.<\/p>\n The generation should\u00a0be recorded when\u00a0it can be\u00a0established. Similarly,\u00a0the safety configuration\u00a0should be described\u00a0separately because an\u00a0Artemis V3 without\u00a0shielded safeties is\u00a0not identical in\u00a0configuration to one\u00a0equipped with them.<\/p>\n The Artemis V3 also reflects Atlas Gunworks\u2019 emphasis on configurable components and detailed manufacturing. Its shielded ambidextrous safeties provide a distinctive control profile while maintaining the recognizable layout of the 2011 platform. In addition, the V3 generation incorporates updated sight and optic-related components that distinguish it from earlier Artemis versions. Configuration details can vary between individual pistols, particularly when factory options or later modifications are involved. Therefore, accurate documentation should identify the specific safety arrangement, sight system, finish, optic configuration, and other components installed on the individual firearm.<\/p>\n The combination of\u00a0the Artemis V3\u00a0platform and shielded\u00a0ambidextrous safeties creates\u00a0a recognizable configuration\u00a0within the Atlas\u00a0Gunworks product family.<\/p>\n The V3 designation\u00a0identifies the generation, while the shielded\u00a0ambidextrous safety describes\u00a0a specific control\u00a0configuration. Other components\u00a0can then be\u00a0documented independently.<\/p>\n This modular approach\u00a0produces a more\u00a0accurate product description\u00a0than attempting to\u00a0associate every feature\u00a0with the model\u00a0name alone.<\/p>\n The Artemis V3\u00a0is a firearm\u00a0and should be\u00a0handled in accordance\u00a0with the manufacturer’s\u00a0instructions and applicable\u00a0laws.<\/p>\n The firearm should\u00a0be stored securely\u00a0against unauthorized access. Routine handling should\u00a0follow established firearm-safety principles, and\u00a0maintenance should be\u00a0performed according to\u00a0the manufacturer’s documentation.<\/p>\n Because the safety is a critical firearm control, modifications or fitting should be left to the manufacturer or a qualified professional rather than attempted from generic instructions<\/p>\n Atlas Gunworks Artemis v3 pistols Atlas Gunworks Artemis v3 pistols Atlas Gunworks Artemis v3 pistols Atlas Gunworks Artemis v3 pistols Atlas Gunworks Artemis v3 pistols Atlas Gunworks Artemis v3 pistols Atlas Gunworks Artemis v3 pistols Atlas Gunworks Artemis v3 pistols Atlas Gunworks Artemis v3 pistols Atlas Gunworks Artemis v3 pistols Atlas Gunworks Artemis v3 pistols Atlas Gunworks Artemis v3 pistols.<\/p>\n The Atlas Gunworks\u00a0Artemis V3 with\u00a0shielded ambidextrous safeties\u00a0combines the updated\u00a0V3 generation of\u00a0the Artemis platform\u00a0with a distinctive\u00a0bilateral manual-safety\u00a0configuration.<\/p>\n The shield surrounding\u00a0the safety provides\u00a0a visibly different\u00a0control profile from\u00a0a conventional ambidextrous\u00a0safety, while the\u00a0bilateral arrangement preserves\u00a0access to the\u00a0manual safety from\u00a0either side of\u00a0the frame.<\/p>\n Beyond the safety configuration, the V3 generation introduces other documented changes, including a revised front-sight system and updated optic-plate design. Atlas itself has published technical information explaining these V3 developments.<\/p>\n For cataloging purposes, the most accurate\u00a0description should identify\u00a0the pistol as\u00a0an\u00a0Atlas Gunworks Artemis\u00a0V3<\/strong>\u00a0and then separately\u00a0document the\u00a0shielded ambidextrous safety\u00a0configuration<\/strong>, safety bias if\u00a0known, sight system, optic configuration, finish, and other installed\u00a0components.<\/p>\n That approach is\u00a0particularly useful for\u00a0premium 2011-style\u00a0firearms because individual\u00a0examples can differ\u00a0considerably in configuration. Factory documentation\u00a0should\u00a0detailed machining, configurable\u00a0components, and available\u00a0safety configurations.\u00a0The shielded ambidextrous\u00a0safeties are one\u00a0of the clearest\u00a0external features for\u00a0distinguishing a particular\u00a0configuration while also\u00a0illustrating the platform\u00a0be preferred whenever\u00a0available, while aftermarket\u00a0modifications should be\u00a0clearly identified as\u00a0such.<\/p>\n Overall, the Artemis\u00a0V3’s identity\u00a0comes from the\u00a0combination of its\u00a02011-style architecture, V3-generation updates, detailed machining, configurable\u00a0components, and available\u00a0safety configurations.\u00a0The shielded ambidextrous\u00a0safeties are one\u00a0of the clearest\u00a0external features for\u00a0distinguishing a particular\u00a0configuration while also\u00a0illustrating the platform’s\u00a0emphasis on detailed\u00a0control geometry and\u00a0individualized setup.<\/p>\n","protected":false},"excerpt":{"rendered":" Atlas Gunworks Artemis\u00a0V3 \u2014 Shielded Ambidextrous Safeties The Atlas Gunworks Artemis v3 pistols\u00a0is a premium\u00a02011-style pistol\u00a0configuration, and the\u00a0shielded ambidextrous safeties\u00a0are<\/p>\n","protected":false},"featured_media":11616,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_brand":[],"product_cat":[52,55],"product_tag":[],"class_list":["post-11615","product","type-product","status-publish","has-post-thumbnail","product_cat-shop-all-accessories","product_cat-atlas-gun","first","instock","sale","shipping-taxable","purchasable","product-type-simple"],"jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/spfirearmguns.com\/index.php?rest_route=\/wp\/v2\/product\/11615","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/spfirearmguns.com\/index.php?rest_route=\/wp\/v2\/product"}],"about":[{"href":"https:\/\/spfirearmguns.com\/index.php?rest_route=\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/spfirearmguns.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=11615"}],"version-history":[{"count":1,"href":"https:\/\/spfirearmguns.com\/index.php?rest_route=\/wp\/v2\/product\/11615\/revisions"}],"predecessor-version":[{"id":11617,"href":"https:\/\/spfirearmguns.com\/index.php?rest_route=\/wp\/v2\/product\/11615\/revisions\/11617"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/spfirearmguns.com\/index.php?rest_route=\/wp\/v2\/media\/11616"}],"wp:attachment":[{"href":"https:\/\/spfirearmguns.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=11615"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/spfirearmguns.com\/index.php?rest_route=%2Fwp%2Fv2%2Fproduct_brand&post=11615"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/spfirearmguns.com\/index.php?rest_route=%2Fwp%2Fv2%2Fproduct_cat&post=11615"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/spfirearmguns.com\/index.php?rest_route=%2Fwp%2Fv2%2Fproduct_tag&post=11615"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}Artemis V3 Platform<\/h3>\n
Ergonomic Characteristics<\/h3>\n
Right-Biased and Left-Biased Configurations<\/h3>\n
Product Description<\/h3>\n
![\"Atlas](\"https:\/\/spfirearmguns.com\/wp-content\/uploads\/2026\/09\/photo_2026-09-30_00-31-40-300x225.jpg\")
Configuration Verification<\/h3>\n
\n
Safety and Maintenance<\/h3>\n
Summary<\/h3>\n
V3 Generation and Design Evolution<\/h2>\n
Shielded Ambidextrous Safeties<\/h2>\n
Ergonomic Characteristics<\/h2>\n
Right-Biased Configuration<\/h2>\n
V3 Front Sight System<\/h2>\n
Optics Configuration<\/h2>\n
Machining and Manufacturing<\/h2>\n
Product Configuration<\/h2>\n
\n
Factory and Aftermarket\u00a0Components<\/h2>\n
Maintenance and Service<\/h2>\n
Documentation for Collectors<\/h2>\n
Distinguishing Artemis Generations<\/h2>\n
Product Identity<\/h2>\n
Responsible Handling<\/h2>\n
Final Product Summary<\/h2>\n